My STB | Activation Code | Download | Support | How To... | ITech products
Report Bugs: bugs@mystb.tv | Copyright © MySTB.TV
iSpace C6 promotion

Activation Code

Software update

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Scroll bottom of the page. Press on "Software update: Check Now"

Note: This option may NOT be available if box use old software!

Manually: Goto MENU -> Activation Code. Enter Code:

- iSpace C6: 000267

Note: If your STB is not iSpace C6 DO NOT use this code. Box will not start after!

Note: Wait until update finish. Do NOT reboot the box before update finish, it may take upto 10 min (depend your internet speed).

Other Code

Contact your local dealer.

 

Note: Activation Code support aslo GScam and WEcam protocol. (Support your own on request). More info activecode@mystb.tv

Download

Update via box WEB Interface (Recommend for ALL box models)

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Scroll bottom of the page. Press on "Software update: Check Now"

Note: This option may NOT be available if box use old software!

iSpace C6

Update: 2019-05-13 Download

Note: Copy update.dat file to USB main folder. Goto Menu -> USB Update

Note: If your STB is not iSpace C6 DO NOT use this file. Box will not start after!

Support

iSpace C6

Write as at iSpaceC6@mystb.tv

Address: 18, Kostur str, Sofia, Bulgaria

Tel: +359 888 448 444

iSpace C6 promotion

SatXtrem/Openbox S18

Contact your local dealer or goto www.satxtrem.org

How To...

Contents

Box not Start

If box not start, show boot logo too long time:

1) Download REPAIR File.

2) Unzip and copy to USB main folder.

3) Download MOD File.

4) Copy kmod.dat to USB main folder.

5) Download Update file for your box model from here.

6) Copy update.dat file to USB main folder and rename it to repair.dat.

7) Insert USB to the box.

8) Restart Box.

9) Wait to complete update. (about 5 min.)

Note: You can skip step 1-4 if last install software is after 2013-Aug-20!

Note: Your setting will not be lost!

Use 2G/3G USB modem

Internet from 2G/3G USB modem:

1) Remove PIN CODE from card.

2) Insert into USB. (Message will be show on screen on insert).

3) Wait to connect.

Note: GSM Signal and Connection status can be seen on Info Bar bottom/right corner.

Note: You do not need enter any setting like APN and other, all is automatic.

Use iPhone/iPad AirPlay

To AirPlay video or photo content to your "STB-IPTV Box":

1) Connect your iOS device and "STB-IPTV Box" to the same Wi-Fi network.

2) Open either the Videos, Safari or Photos app on your device.

3) Locate and tap the AirPlay icon (if attempting to AirPlay video content from Safari or Videos, begin playback first).

4) Select your "STB-IPTV Box" from the list of available devices that appears and begin playback.

Watch TV from PC/Phone/Tablet

To Watch TV from PC/Phone/Tablet:

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Under "Channel List" click on top/left icon "Play on PC/Mobile".

Note: Direct TV streaming address: http://192.168.X.X:8080/ (192.168.X.X is your box Local IP address)

Note: Example video player application: Windows/Linux PC - VLC, Android - MX Player, iPhone/iPad - OPlayer Lite

Stream Full TP to network (make own IPTV server)

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Press on "Settings/Streaming Setting".

4) Set Stream Type: Single Channel or Full Transponder.

5) If choose Full Transponder, set IP address and port to stream (support Unicast, Multicast and Broadcast streaming).

Note: Single Channel streaming address http://192.168.X.X:8080/ (192.168.X.X is your box Local IP address), bandwidth is 3-10Mbit depend the Channel.

Note: Full Transponder streaming is over UDP, bandwidth is 40-90Mbit depend the Transponder.

Note: This option is available for iSpace C6 only!

Hide IPTV Links

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Goto IPTV.

4) On ADD or Import check Hide Link(s).

optional) To hide all links just load in browser http://mystb.tv/iptv_hidelink.html (must be in same Wi-Fi network) or http://192.168.X.X/iptv_hidelink.html (192.168.X.X is your box Local IP address)

Note: This option is available for iSpace C6 only!

Setup Web password

Setup password for Web interface:

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Press on "Tools/Web password".

4) Enter "Current Password" (default no password).

5) Enter "New Password" and "Retype New Password".

6) Press Save.

Note: This option is available for iSpace C6 only!

Setup HomeShare with multiple STB

Setup HomeShare via Web interface:

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Press on "CAM Settings/CAM Accounts".

4) Select "Enable", "HomeShare" and enter STB IP you want to connect to.

5) Press Apply.

Note: This option is available for iSpace C6 only!

Net Disk

Setup Network Disk via Web interface:

1) Open any internet browser.

2) Type "Box IP" (can be seen on info bar bottom/right corner i.e.: 192.168.X.X) or type "MySTB.TV" (will autodetect your box IP, must be in same Wi-Fi network).

3) Press on "Tools/Shared Net Disk".

4) Enter under "Remote IP" shared disk ip address.

5) Enter "User" and "Password" if require.

6) Click on "Find Shared Folders". Available shared folder will be shown.

7) Select the Folder you want to mount.

8) Optional you can set "Local Folder".

9) Press Save.

VPN

Setting VPN client:

##############################################
# Sample client-side OpenVPN config file     #
# for connecting to multi-client server.     #
#                                            #
# This configuration can be used by multiple #
# clients, however each client should have   #
# its own cert and key files.                #
#                                            #
##############################################

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
dev tun

# Are we connecting to a TCP or
# UDP server?  Use the same setting as
# on the server.
;proto tcp
proto udp

# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote my-server-1 1194
;remote my-server-2 1194

# Choose a random host from the remote
# list for load-balancing.  Otherwise
# try hosts in the order specified.
;remote-random

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server.  Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# Try to preserve some state across restarts.
persist-key
persist-tun

# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here.  See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot
# of duplicate packets.  Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings

# SSL/TLS parms.
# See the server config file for more
# description.  It's best to use
# a separate .crt/.key file pair
# for each client.  A single ca
# file can be used for all clients.
<ca>
--- PAST DATA ---
</ca>
<cert>
--- PAST DATA ---
</cert>
<key>
--- PAST DATA ---
</key>

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo

iSpace C6 promotion